What characteristics distinguish an excellent bong?
What characteristics distinguish an excellent bong?
I've always had an affinity for glass. I may be able to assist you.
There are a few key features to look for in a bong that you should consider carefully before purchasing. If you don't think this through, you can wind up with a very costly piece of glass that is used just sometimes or never at all.
1.Size.
This is, without a doubt, the most crucial. Do you want your pal to fire a three-foot monster for you? Or are you looking for a coffee table that isn't quite a foot long?
Is it still the case that you live with your parents? Is it okay if you have a bong on your person? Smaller components are simpler to conceal and clean since they need less rubbing alcohol or other cleaning agents.
Even though I live alone, I'm a smaller piece guy, and my bong rests on my coffee table. I tend to get fresher hits around 1 foot and lower, and the smoke is delightfully cold and smooth with current percs.
2. The quality of the glass
This is an area where I do not advocate skipping. Everyone has seen photos of a great large bong cracking, and the glass is usually pretty thin. High-quality glass can help you prolong the life of your purchase and provide you peace of mind in the event of an accident.
I had a 7mm thick custom crafted ROOR icemaster in late high school. It was a fantastic bong, but I was young and foolish to spend so much money on it. (It's true that I didn't have much else to do with it, but saving is always a smart choice.) To cut a long tale short, in my stoned condition, that sucker fell so many times that I stopped caring when it did. When it landed on the tile in my parents' kitchen, it shattered it, but it was otherwise uninjured. They still haven't figured out that it was a bong that caused it.
In any case, excellent quality glass does not have to be costly, but there are several telltale signs that it is high-quality and long-lasting.
It's all in the joints, number two.
Pull an illadelph from the case at a tobacco store or a glass gallery. Examine their welds and connections (where the downstem goes in, where the perc connects to the rest of the tube, etc.). They're all smooth, with no bubbles in the glass, and they're all done in the same way. That's what you're looking for. Joints that are well-done are a hallmark of quality and guarantee that your item will last a long time.
3. Strike it! Don't simply stand there!
Once you've narrowed down your choices, have the shopkeeper put water in each and take them out to compare. Keep an eye on the bubbling activity. You want a smooth bubbling movement over a popping/chugging action, with minimal resistance.
Greater percs typically equals more drag, particularly if they weren't correctly constructed or blasted unevenly, imperfectly, or inconsistently. Smoke/air will choose the route of least resistance, therefore if each slit isn't symmetrical, one will get the bulk of the smoke, causing the device to malfunction.
M&M tech, ROOR, ROORtech, AMG, HBG, Liquid Sci, and Jerome Baker's new scientific line are a few products I suggest.
Alternatively, go to SmokeWeapon Online Headshop and get a beautiful money-saving bong.
Choosing a fantastic bong is a pleasurable endeavor that culminates in a fantastic smoking experience. Take into account all of these criteria and choose the ideal item for your wallet! Enjoy!
What distinguishes a good bong from the rest?
Glass has always piqued my interest. I may be able to help you.
There are a few crucial characteristics to look for in a bong that you should think about before buying one. If you don't think this through, you can end up with a very expensive piece of glass that is only used sometimes or never.
1.Size.
Without a question, this is the most important. Do you want a three-foot monster fired at you by a friend? Or do you need a coffee table that isn't nearly a foot in length?
Is it true that you still live with your parents? Is it OK to have a bong on you? Because smaller components need less rubbing alcohol or other cleaning agents, they are simpler to hide and clean.
I'm a smaller piece man, and my bong sits on my coffee table, despite the fact that I live alone. With current percs, I get fresher hits about 1 foot and lower, and the smoke is completely cool and smooth.
2. The glass's quality.
I do not recommend skipping this section. Everyone has seen pictures of a huge bong breaking, and the glass is generally pretty thin. High-quality glass may help you get the most out of your investment by extending its life and giving you piece of mind in the case of an accident.
In late high school, I got a 7mm thick bespoke Eaglebongs icemaster. It was an incredible bong. To shorten a long story short, that sucker dropped so many times in my stoned state that I stopped caring when it did. It cracked the tile in my parents' kitchen when it fell on it, but it was otherwise unharmed. They still haven't worked out that the cause was a bong.
In any event, good glass does not have to be costly, but there are several telltale signals that it is of good quality and will endure a long time.
Number two, it's all in the joints.
At a cigarette shop or a glass gallery, take an illadelph from the case. Examine their connections and welds (where the downstem goes in, where the perc connects to the rest of the tube, etc.). They're all smooth, with no bubbles in the glass, and made the same manner. That's exactly what you're after. Well-done joints are a sign of quality and guarantee that your work will survive a long time.
3. Go for it! Don't just stand still!
Once you've narrowed down your options, have the shopkeeper fill each with water and compare them. Keep an eye on the activity as it bubbles. A smooth bubbling movement with low resistance is preferred versus a popping/chugging motion.
More drag is usually associated with larger percs, particularly if they were not properly built or blasted unevenly, poorly, or inconsistently. Because smoke/air takes the route of least resistance, if each slit isn't symmetrical, one slit will get the bulk of the smoke, leading the device to malfunction.
Eaglebongs is a brand that I endorse. Eaglebongs sells highly recommended and often used glass bongs without a doubt. This is one of the greatest bong manufacturers, producing high-quality glass bongs. Look into why this occurs.
Choosing a superb bong is a fun pastime that leads to an amazing smoking experience. Consider all of these factors before selecting the best thing for your wallet! Enjoy!
CHEAP DAB RIGS CAN BE FOUND HERE!